Salvador SuperCut Chop Saws – Thru Feed Solutions
The Salvador SuperCut High-Speed Optimizing Saw is the result of over 30 years of technological advancements and innovation in wood manufacturing. With standard features including a toothed belt advancing system for increased control and precision, powerful infeed motor for maximum productivity, and easy-to-use industrial windows operating system, Salvador’s SuperCut series ensures manufacturers of all sizes get the most out of every cut.
Strength and Stability
All Salvador machines are built to last, featuring a robust design for stable, vibration-free support and powerful cutting accuracy. The SuperCut series comes standard with a powerful 10hp main motor and unique feeding system with a toothed infeed belt and robust steel cables allowing for maximum control of the workpiece during operation.
Intuitive Software for Optimal Productivity
The SuperCut allows users to optimize both productivity and yield with its industrial PC Windows operating system and easy-to-use software. These standard features make it simple for operators to import cut lists and other important data directly from Excel to the machine’s operating system, for seamless transitions between jobs. Additionally, all the software integrated into the SuperCut series can be accessed by the internet, making it easy for the factory to diagnose and fix any problems that may arise.
Complete Workpiece Control
The SuperCut’s unique feeding system allows for maximum control and stability during cutting operations. A toothed infeed belt featuring an ergonomic steel alignment guide creates ultimate stability and precision, while eight large diameter wheels guide the workpiece through the machine with automatic pressure control to further stabilize workpieces of varying shapes and sizes.
Advanced Safety Features
The SuperCut is not only powerful and highly-accurate during cutting operations, but also extremely safe to use. The sound enclosure and automatic push feed controls prevent operators from getting close to the blade during operation. Innovative laser curtains provide additional safety by pausing production when obstructed by a hand or any other unidentified object.
SuperCut 100
Strength and stability
The robust, reinforced steel structure and cutting group provide unmatched stability to produce clean, square, and consistent cuts. The Salvador SuperPush 100 is both durable and low-maintenance, resulting in a long life of highly-accurate cut-to-length production.
By anchoring the cutting group to the floor with the use of sturdy flanged steel feet, the SuperCut 100 offers powerful vibration free cuts.
Powerful precision
The infeed belt conveyor and advancing rollers are controlled by the same motor, creating a synchronized infeed system for all workpieces.
The electronic brushless motor enables increased feed speeds with rapid acceleration and deceleration. The motor is managed by numerical control based on the cross-cutting section, weight, and shape of the workpiece.
The SuperCut 100’s unique infeed system provides secure workpiece control and enhanced precision, featuring a unique toothed belt that allows for maximum adhesion of the material being processed. Additionally, the toothed belt is covered in 3 mm of polyurethane and reinforced with steel cables, providing superior strength and longevity.
SuperCut 300 K
Double Traction Advancing System
The electronic brushless motor is operated using numerical control based on the cross-cutting section, weight, and shape of the workpiece to enable rapid acceleration and deceleration during the infeed process. Innovative photocells read each workpiece to ensure full optimization.
-
Six idle, large-diameter pneumatic pressing wheels (3 couples) apply even top pressure
-
Infeed side wheel helps ensure proper alignment.
-
Three hardened drive rollers with teeth are synchronized with the infeed belt conveyor; workpiece movement is driven from the top and the bottom at same time.
-
118 mm diameter
-
150 mm width
-
Chemically and thermally treated for superior longevity.
The pneumatic lifting and descending of each toothed roller is regulated by computer numeric control based on the thickness of each workpiece. The cylinders are reinforced with special steel plates to guarantee a long life and duplicated to accommodate a wide variety of wood thicknesses.
-
Feed motor: 18 Nm
-
Feeding speed: 0-150 m/min
-
Electronic air jet system manages small waste.
-
An air tank manages a plant air supply absence caused by external factors
Kickers
Numerical control enables programming for variable cutting lengths to optimize sorting processes. Three high speed ejectors have three sliding guides for each one. Workpieces with specific measurements are ejected from various positions on the conveyor by the appropriate kicker. Longer pieces can be ejected by two kickers firing at the same time. Waste pieces are collected at the end of the conveyor.
-
Double photocell system reads the workpiece.
-
The belt is driven centrally by a trapezoidal strip.
-
Large-diameter rollers have a long life.
-
Motor: 1.5 HP
-
Speed: 140 m/min
SuperCut 500 K
Double Traction Advancing System
The electronic brushless motor is operated using numerical control based on the cross-cutting section, weight, and shape of the workpiece to enable rapid acceleration and deceleration during the infeed process. Innovative photocells read each workpiece to ensure full optimization.
-
Six idle, large-diameter pneumatic pressing wheels (3 couples) apply even top pressure
-
Infeed side wheel helps ensure proper alignment.
-
Three hardened drive rollers with teeth are synchronized with the infeed belt conveyor; workpiece movement is driven from the top and the bottom at same time.
-
118 mm diameter
-
150 mm width
-
Chemically and thermally treated for superior longevity.
The pneumatic lifting and descending of each toothed roller is regulated by computer numeric control based on the thickness of each workpiece. The cylinders are reinforced with special steel plates to guarantee a long life and duplicated to accommodate a wide variety of wood thicknesses.
-
Feed motor: 18 Nm
-
Feeding speed: 0-150 m/min
-
Electronic air jet system manages small waste.
-
An air tank manages a plant air supply absence caused by external factors
Kickers
Numerical control enables programming for variable cutting lengths to optimize sorting processes. Three high speed ejectors have three sliding guides for each one. Workpieces with specific measurements are ejected from various positions on the conveyor by the appropriate kicker. Longer pieces can be ejected by two kickers firing at the same time. Waste pieces are collected at the end of the conveyor.
-
Double photocell system reads the workpiece.
-
The belt is driven centrally by a trapezoidal strip.
-
Large-diameter rollers have a long life.
-
Motor: 1.5 HP
-
Speed: 140 m/min