Makor Profile Series

Machine equipped with fladder wheels designed for sanding raw and painted profiles.
The frame is made of steel and aluminium to grant a perfect solidity and avoid vibrations.
It can run mouldings up to 12 inches wide.

The set-up time of the machine is drastically reduced thanks to the smart design of the side guides and pressure wheels regulation systems.

Commands are accessible and easy to use.

This machine was created for the honing and calendaring of linear profiles and furniture parts, through brushes with fladder­type abrasive materials.

The high versatility allows for the choice of LCF that most adapt to your needs, whereas the most complete version of the machine is made of 8 brushing groups: 4 opposite groups for the sides of the profile, 2 groups for the upper face and 2 for the lower face. In the numerically controlled version, regulation of the axis of every group, clamps and side guides is effected by brushless engines capable of quickly adjusting the machine to the type of profile section to be worked upon.

The transportation of up to 9 inches long profiles is made possible by the use of a vacuum system that highly increases the grip of the pieces on the belt, permitting the honing of raw materials, even with belts. Thanks to the wide modularity, the LPC can be equipped with all the operating groups that all Makor honing machines are endowed with, making the honing operations on parts of dismantled fixtures and mobile parts, which previously had to be worked upon by hand, automatic. The pressurising of the belt can be made partial, in accordance with the type of profile worked upon.

The linear Spraying Machine mod. IRIDE 304 and IRIDE 306 has been designed to satisfy the current anti-pollution requirements and for the protection of the working environment. It allows the automatic spraying in line of varnishing products on picture frames, valances, match boarding, door and window parts, furniture elements etc. up to 200 mm wide. A wide spraying booth contains two or three suction vats (made of a special anti-adherent material) where two spraying guns (each vat) can be placed. A special dry filtering device allows the retaining of the dust produced during the spraying phase. A PLC control system, equipped with a big display, checks all the machine functions. Every kind of automatic spraying gun (hvlp, air mix or airless) can be assembled to this machine.

This Automatic Sanding Machine LP is particularly suitable to sand different types of mouldings, both varnished and raw and to work wide pieces up to 12 inches width. A great modularity and a wide range of operating groups satisfy every requirement in sanding. Moreover, the moulding belt-system conveyor, realized by using a 6 inches wide belt, supported from both sides, assuring smooth feed and stability. An easy and rapid set-up during the moulding changing makes our LP your ideal machine for every painting line, even running a speed over 300 ft/min.

This machine is designed to apply water based and UV acrylic paint products on furniture and building profiles, skirting boards, match boarding, and frames in general, using vacuum system cycles.

The paint product application can be applied on 3 or 4 sides or on specific parts of the profile, with complete product recovery. This machine is particularly suitable for surface and finishing application processes involving complete production increase finishing lines.

STORM is available in two machine configuration set-ups:

• STORM UV
  for the application of varnished products requiring UV polymerisation processes 
• STORM WB
  for the application of water based varnishing products. The STORM WB has the filter cabinet completely covered with non-stick material allowing extremely quick and simple clean up at the end of the shift.

Machine designed for the in-line coating of varnish and chalk products on building profiles by implementing extruding system technology processes. It is particularly suited to the finishing of MDF or finger-joint pine profiles on 3 or 4 sides, with profile widths up to 12 inches wide. The specific extrusion technology enables for extremely high quality results at over 300 ft/min production speeds, compared to the vacuum and spray application systems. Designed to meet the ever increasing customer requirements, the TF/P is a very reliable, speedy, silent and powerful machine.

Machine set-up is very quickly conducted thanks to the implementation of pneumatic presser wheels driven by a single control unit. Each pressor wheel features its own pressure adjustment device based on millimetric positioning adjustment. Quick 'n easy machine guide set­up without additional use of any tools. Cogged belts feature powerful and silent machine transmission. A wide range of optional devices enable machine configuration to accurately meet customer requirements.

The linear spraying machine mod. IRIDE 204 and 206 UV have been realized to spray in line UV paint on profiles made of wood, MDF, PVC, metal and on frames in general. Inside a spacious spraying booth there are two suction vats with two or three guns for each vat. Thanks to a special filter system, which allows the recovering of the over-spray, costs on the profile can be diminished. A PLC control system, equipped with a wide display, checks all the machine functions.

Automatic machine designed to shape silicone wheels and abrasive disks. The profile data input is through an automatic mechanic copier. Extremely easy to use.